Inspirational journeys

Follow the stories of academics and their research expeditions

CompTIA Server+ Certification Exam Questions and answer - Part 31

Mary Smith

Sat, 18 Apr 2026

CompTIA Server+ Certification Exam Questions and answer - Part 31

1. A SAN attached production file server is required to be backed up nightly according to company policy. Recently the data to be backed up has increased to approximately 4TB. Currently,the server has a single attached LTO2 tape drive. Which of the following should the server administrator do to provide enough backup capacity for the nightly job?

A) Replace the LTO2 tape drive with an LTO3 tape drive.
B) Replace the single tape drive with a tape library.
C) Reduce the amount of data to be backed up.
D) Replace the backup software with a more efficient application.



2. A number of users are indicating that access to a network file server is responding very slowly when reading or writing to the share. The server administrator notes that a drive has failed in a four-disk RAID 5 array. The array is running in a degraded state because no hot spare was configured. After replacing the failed disk,which of the following steps would be BEST to take to prevent slow response after a drive failure?

A) Add a drive to the array,and configure it as a cold spare.
B) Add an additional hard drive,and convert the volume to a RAID 10 configuration.
C) Add an additional hard drive,and convert the volume to a RAID 6 configuration.
D) Add a drive to the array,but do not configure it as a hot spare.



3. A server is having problems accessing its presented storage on a SAN. Which of the following could be causing the problem? (Select TWO).(Select 2answers)

A) NIC
B) Tape backup drive
C) SCSI adapter
D) CPU
E) HBA


4. A server is connected to a gigabit Ethernet switch and has negotiated 1Gbps / Full Duplex. When transferring large files to and from other servers on the segment via FTP slow performance is noticed. All network cabling,network hardware and server hardware were verified to be working correctly. Which of the following could be done to improve performance?

A) Decrease the UDP window size.
B) Decrease the TCP window size.
C) Increase the TCP window size.
D) Increase the UDP window size.



5. A server administrator is notified of an OS hot fix for a production server. Which of the following BEST represent how the hot fix should be applied? (Choose two.)(Select 2answers)

A) The hot fix should be applied after testing in a production environment
B) The hot fix should be applied once it has been superseded
C) The hot fix should be applied when it is released from the vendor
D) The hot fix should be applied after following proper change management procedures
E) The hot fix should be applied after testing in a non-production environment


1. Right Answer: B
Explanation:

2. Right Answer: C
Explanation:

3. Right Answer: A,E
Explanation:

4. Right Answer: C
Explanation:

5. Right Answer: D,E
Explanation:

0 Comments

Leave a comment